IOTAVX PA3 (REFURBISHED)
Refurbished units with full warranty.
The IOTAVX PA3 is a powerful stereo power amp that uses Class AB amplification technology. The generously dimensioned toroidal transformer provides the power amp with more than enough power at all times, so even difficult music passages can be reproduced absolutely naturally with maximum dynamics. At 4 ohms, the PA3 provides 100W per channel in stereo mode. If more power is required, the power amp can also be used in mono mode (bridged). In this case, 180W are available for one channel. However, it is not just the pure performance data that characterizes this power amplifier. The specially developed amplifier circuit ensures excellent efficiency of the AB amplifier technology as well as a more precise reproduction with minimized distortion. Another special feature of the stereo power amplifier is the preamp outputs, with which the signal can be passed on to another amplifier as needed. In addition, the PA3 provides trigger and dimmer inputs and outputs so that the device can be synchronized with your other devices with regard to the turn-on and turn-off behaviour as well as the illumination intensity. Quality promise Not only does the IOTAVX PA3 sound fantastic, but we also manufacture it with a heavy steel case and high-quality components. This will ensure that you can enjoy your IOTAVX PA3 for a long time.
Manual for the IOTAVX PA3
|Product Type:||Stereo power amplifier|
|Continuous power (load-dependent):||
50W (8Ω, 2 channels), 100W (8Ω, 1 channel bridged),
100W (4Ω, 2 channels), 180W (4Ω, 1 channel bridged),
|Connections:||RCA inputs, 1x Pre Out|
|Total harmonic distortion (THD + N):||≤0.02% (nominal value: A weighting)|
|Frequency response (+/- 3dB):||10Hz - 100kHz|
|Power supply:||115VAC or 230VAC, @ 50 / 60Hz|
|Dimensions (W x H x D):||435 x 59 x 240 mm|